Skip to content

Optional: Only route DNS via VPN

Optional: Only route DNS via VPN

With this setup, you will force connected clients to use only the DNS provided by the VPN connection, i.e. the Pi-hole. Do this only if you don't want to tunnel all traffic from the client through the VPN, but only its DNS queries.

Edit your /etc/openvpn/server/server.conf and remove (comment out) the following line:

# push "redirect-gateway def1 bypass-dhcp"

Using a client config file

This works pretty much out of the box with common client.ovpn files, like this provided one: client.ovpn

Remember to replace the locations of your keys and the address/hostname of your server.

Using the Network Manager

When using the Network Manager, you will have to do some additional setting on the client's side of things:

Alternative 1: Disable Network Manager's internal DNS server

Edit /etc/NetworkManager/NetworkManager.conf:

# dns=dnsmasq

and restart the Network Manager:

sudo restart network-manager

When connecting your DNS server will now be properly picked up and used by your client.

Alternative 2: Set DNS server address of your Pi-hole manually on the main interface

You can also set the address of the DNS server manually (use the device which actually connects to the internet, e.g. eth0):

After doing either alternative, you should see:

pi.hole has address W.X.Y.Z (outside address of your VPN server)
pi.hole has IPv6 address A:B:C:D:E:F (outside address of your VPN server)

The web interface of your Pi-hole will be visible at http://pi.hole/admin/ (even with the recommended firewall configuration mentioned on another subpage)


Troubleshooting

If your new DNS server configuration has not been activated (try restarting the interface/system) you will see

host pi.hole
Host pi.hole not found: 3(NXDOMAIN)

If you are not connected to your VPN network you will see

host pi.hole
;; connection timed out; no servers could be reached